1992 GTI R32 VR6 project...

Moderators: Rennwagen1, Mikewire

Re: 1992 GTI R32 VR6 project...

Postby Mikewire on Nov Sun 26, 2017 12:01 am

Got the 16v installed and the motor mounts all torqued down. I replaced the hockey puck front mount with a real OEM mount, and began to sort out what needs to go where. Got a few things connected, and then called it a night.

Image


Today I pulled the steering wheel and picked up some tools to pull the large spine adapter. One that was off I installed the new wheel. Cleaned up the plastic column shroud and buttoned everything up until later.

Cleaned up the cluster surround, swapped in the working brake indicator assembly, put in the blanks to fill in the open spots on the switch cluster.

Lighting wasn't very good but here's a before and after:

Image

Image

2015 Audi Q5 2.0T Premium Plus
2005.5 VW Jetta TDI 5 speed
2001 Audi Allroad Quattro 2.7TT 6 speed manual swap
2001 VW Beetle 1.8T GLX 5 speed
1992 VW Montana Green GTI
1972 VW Kombi 9 Passenger Deluxe w/ 2.0L F.I. VWAC

FAQ | Forum rules
User avatar
Mikewire
Site Admin

Site Admin
 
offline
 
Posts: 4026
Joined: Oct Thu 20, 2005 1:23 am
Location: Billings, MT
Vehicles: Air and Water

Previous

Return to VW/Audi

Who is online

Users browsing this forum: No registered users

cron