Renewed to the forums

This forum is for all diesel and TDI owners.

Moderator: BigSkyEuro Moderators

User avatar
MT-Getto
Euro Addict!!!
Euro Addict!!!
Posts: 2718
Joined: Dec Sun 17, 2006 11:46 am
Vehicles: 70 dzl-camper
20VTMK2GLI
A8L, RAM
Location: Fraggle Rock

Re: Renewed to the forums

Post by MT-Getto » Mar Wed 17, 2010 8:51 pm

Bummer.
It's not how fast you go. It's how well you go fast.

User avatar
Darkside
Euro Addict!!!
Euro Addict!!!
Posts: 1161
Joined: Aug Sat 23, 2008 8:23 pm
Vehicles: 97' Jetta VR6
85' Golf 8v
Location: Buildings
Contact:

Re: Renewed to the forums

Post by Darkside » Mar Thu 18, 2010 9:43 am

got any pics? might help
MKIII VR6 MKII 8v

User avatar
vrtpassat
In the drivers seat...
In the drivers seat...
Posts: 594
Joined: Apr Wed 02, 2008 5:09 pm
Vehicles: 93 passat glx twin gt30's in the works
Location: the zoo

Re: Renewed to the forums

Post by vrtpassat » Mar Thu 18, 2010 11:34 am

is the throw out bearing the same if it is bigger you would have no play just a thought
i can't spell but if you stare at it long enuff it looks like a hiden vr6

arleerabbit
n00b...
n00b...
Posts: 7
Joined: Mar Tue 16, 2010 8:48 pm
Vehicles: '81 Rabbit diesel sunroof coupe
Location: Arlee, MT

Re: Renewed to the forums

Post by arleerabbit » Mar Thu 18, 2010 11:02 pm

Darkside wrote:got any pics? might help
I'll try to post some pics friday afternoon.

vrtpassat wrote:is the throw out bearing the same if it is bigger you would have no play just a thought

Yep, it's the same measurements, I'm going to NAPA tomorrow to compare my pressure plate to what they have, since I've compared everything else to the old, and all is well. To me, the pressure plate must not be sitting out far enough for the rod in the input shaft to engage the release plate. I guess we'll see.

Thanks again.

Post Reply