I need a VAG-COM in Billings for a few minutes...

Discussion regarding the software diagnostic solution

Moderator: Mikewire

Postby thetwodubheads on Mar Mon 17, 2008 10:11 pm

Thanks, we have a date set for the 28th to do it, I don't forsee any issues mechanically, I've done timing belts on a couple other cars, just not the diesel. I just would like to know that we can check the timing electronically when we are done. I gave him the web site for Ross Tech, he may just get it himself, but I'm not going to just except that, I'd rather have the bases covered. So anyone willing to meet-up the evening of the 28th to check timing if he doesn't get it?
thetwodubheads
Kicking the tires...

Kicking the tires...
 
offline
 
Posts: 73
Joined: Dec Fri 14, 2007 1:30 am
Location: Billings
Vehicles: 2012 Golf TDI, 2010 Ram 2500 Cummins

Postby Mikewire on Mar Mon 17, 2008 11:13 pm

I can probably swing by on Sat, but the 28th is a Friday, and we are busy those nights. Let me know if Saturday - some time during the day, or night could work.

2015 Audi Q5 2.0T Premium Plus
2005.5 VW Jetta TDI 5 speed
2001 Audi Allroad Quattro 2.7TT 6 speed manual swap
2001 VW Beetle 1.8T GLX 5 speed
1992 VW Montana Green GTI
1972 VW Kombi 9 Passenger Deluxe w/ 2.0L F.I. VWAC

FAQ | Forum rules
User avatar
Mikewire
Site Admin

Site Admin
 
offline
 
Posts: 4026
Joined: Oct Thu 20, 2005 1:23 am
Location: Billings, MT
Vehicles: Air and Water

Postby thetwodubheads on Mar Tue 18, 2008 3:24 pm

Thanks for offering to help out, I'll let you know if we need assistance on saturday.
thetwodubheads
Kicking the tires...

Kicking the tires...
 
offline
 
Posts: 73
Joined: Dec Fri 14, 2007 1:30 am
Location: Billings
Vehicles: 2012 Golf TDI, 2010 Ram 2500 Cummins

Postby CBCGSXR1000 on Mar Tue 18, 2008 6:14 pm

Im closing on my house the 27th or 28th.
might not have time those days movin in that weekend.
If mike isnt able to help ill try to make time wont be easy.
Let me know. :thumbsup:
CHRIS
User avatar
CBCGSXR1000
In the drivers seat...

In the drivers seat...
 
offline
 
Posts: 556
Joined: Jul Thu 26, 2007 9:51 pm
Location: BILLINGS
Vehicles: 2

Postby thetwodubheads on Mar Wed 19, 2008 10:15 pm

Thanks again guys, I'll let everyone know hopefully a day or two ahead of time if we are going to need assistance that way if someone can help, you'd have a little bit of preparation and be able to let me know if it'll work. I'd probably try to get some phone numbers swapped around before hand to make arranging a meeting easier on the fixit day.
thetwodubheads
Kicking the tires...

Kicking the tires...
 
offline
 
Posts: 73
Joined: Dec Fri 14, 2007 1:30 am
Location: Billings
Vehicles: 2012 Golf TDI, 2010 Ram 2500 Cummins

Postby Mikewire on Mar Thu 20, 2008 8:47 am

Too bad you couldn't make Saturday your day to change that belt - I could make it over and wrench, and I have some tools that may help out...i.e. tensioner pulley spanner wrench. If it would help out you can borrow it.

Are you doing new tensioner, h20 pump and all that too?

2015 Audi Q5 2.0T Premium Plus
2005.5 VW Jetta TDI 5 speed
2001 Audi Allroad Quattro 2.7TT 6 speed manual swap
2001 VW Beetle 1.8T GLX 5 speed
1992 VW Montana Green GTI
1972 VW Kombi 9 Passenger Deluxe w/ 2.0L F.I. VWAC

FAQ | Forum rules
User avatar
Mikewire
Site Admin

Site Admin
 
offline
 
Posts: 4026
Joined: Oct Thu 20, 2005 1:23 am
Location: Billings, MT
Vehicles: Air and Water

Postby CBCGSXR1000 on Mar Thu 20, 2008 5:17 pm

U should its a good idea i did :thumbsup:
CHRIS
User avatar
CBCGSXR1000
In the drivers seat...

In the drivers seat...
 
offline
 
Posts: 556
Joined: Jul Thu 26, 2007 9:51 pm
Location: BILLINGS
Vehicles: 2

Postby thetwodubheads on Mar Thu 20, 2008 8:35 pm

Yeah, I gave him ECS's website and he got the ultimate kit. I told him about the water pump issues, and he is also good about reading up on things, so we should have it pretty well covered.
thetwodubheads
Kicking the tires...

Kicking the tires...
 
offline
 
Posts: 73
Joined: Dec Fri 14, 2007 1:30 am
Location: Billings
Vehicles: 2012 Golf TDI, 2010 Ram 2500 Cummins

Previous

Return to VAG-COM diagnostics

Who is online

Users browsing this forum: No registered users

cron