Bench Harness

Discussion regarding the software diagnostic solution

Moderator: Mikewire

Post Reply
User avatar
MT-Getto
Euro Addict!!!
Euro Addict!!!
Posts: 2718
Joined: Dec Sun 17, 2006 11:46 am
Vehicles: 70 dzl-camper
20VTMK2GLI
A8L, Ubaru, RAM
Location: Fraggle Rock

Bench Harness

Post by MT-Getto » Oct Mon 31, 2011 7:26 am

Went to the junk yard and found an ECU connector and built a bench flash harness. These connectors are really easy to take apart and remove / swap pins to your liking. I've decided I'm not going to pay someone to remove my immo when I can make the investment and be able to do it myself. Its working with most diag software but I am still working on getting an EEPROM dump.

Image
Image
It's not how fast you go. It's how well you go fast.

User avatar
Mikewire
Site Admin
Site Admin
Posts: 4037
Joined: Oct Thu 20, 2005 1:23 am
Vehicles: Air and Water
Location: San Antonio, TX
Contact:

Re: Bench Harness

Post by Mikewire » Oct Mon 31, 2011 7:29 am

Nice Trev :beer: :ninja:

2017 VW GLI
2018 VW Atlas R-Line SE w/ Tech 4-Motion
1972 VW Kombi 9 Passenger Deluxe w/ 2.0L F.I. VWAC

FAQ | Forum rules

Post Reply